Ali
Member
- Location
- Aberdeenshire
simple really anyone got one or seen one in the flesh
haughton tri axle stock box
- Thread starter Ali
- Start date
- Location
- Bury St Edmunds, Suffolk
I will be seeing two T35s next week on the Houghton / TFF stand at Royal Welsh Show
Pics will be posted
Pics will be posted
Ali
Member
- Location
- Aberdeenshire
just priced one, and while price is high, not as high as quoted on here, and if the trailer is as good as the sales pitch it is going to be worth serious consideration.
the fact it is nearly 300kgs lighter than my ifor makes a very interesting starting point
the fact it is nearly 300kgs lighter than my ifor makes a very interesting starting point
General-Lee
Member
- Location
- Devon
Saw one at the livestock event and was some good touches with it. But guess it's what you're used to(we run ifor) it didn't look like a stock box but like a container. Fairly hefty price tag!!
Ali
Member
- Location
- Aberdeenshire
I reckon it is about 4k more than the equivalent ifor, although the spec is better on the Houghton.
Couple of things appeal.
weight about 300kgs lighter than my Ifor
All aluminium welded construction
low to ground so should reduce the CoG dramatically
can I justify it, well that is a different question, and over five years the reduced weight better suspension set up etc may just justify it.
Couple of things appeal.
weight about 300kgs lighter than my Ifor
All aluminium welded construction
low to ground so should reduce the CoG dramatically
can I justify it, well that is a different question, and over five years the reduced weight better suspension set up etc may just justify it.
General-Lee
Member
- Location
- Devon
Ali
Member
- Location
- Aberdeenshire
could be but we are cattle only, no decks and two dividing gates
Cowabunga
Member
- Location
- Ceredigion,Wales
Chae1
Member
- Location
- Aberdeenshire
Who are you pricing an ifor from? Duncan mcintosh at Forfar worth a call.
Ali
Member
- Location
- Aberdeenshire
Not really two gates allows us to split the trailer for showing and get good even weight distribution
Ali
Member
- Location
- Aberdeenshire
macintosh is who we use and is a good dealer, always keed to beat any price you would get elsewhere and a really good service.
I am looking for a wheels on the side trailer, and don't really see nugent or graham Edwards etc bing better, just the same type but a good lot more expensive.
So I either have a major step change to the houghton or go ta510.
I am looking for a wheels on the side trailer, and don't really see nugent or graham Edwards etc bing better, just the same type but a good lot more expensive.
So I either have a major step change to the houghton or go ta510.
exmoor dave
Member
- Location
- exmoor, uk
also have 2 dividing gates for my 12ft ifor. makes moving 3 cows or big bullocks a lot safer IMO.
Cowabunga
Member
- Location
- Ceredigion,Wales
My holsteins wouldn't fit.
Ali
Member
- Location
- Aberdeenshire
Good job I don't have Holsteins then
exmoor dave
Member
- Location
- exmoor, uk
ah but I only have pokey little hill reared hereford and angus cows
never had a problem with big steers through. but it's a wheels underneath so each compartment would be 6x4 ft.
exmoor dave
Member
- Location
- exmoor, uk
but then here is a easier solution......sell the cattle and buy some sheep...much easier to trailer around!
Ali
Member
- Location
- Aberdeenshire
We put one in just behind the door which if carrying say bulls, pushes them back a bit over the axles, or we carry calves up front cows across the axles and few calves in the back or as ed, we split her in three equal sizes. We also use wheels underneath DP120
exmoor dave
Member
- Location
- exmoor, uk
same here. if only moving one bull say, use the two gates to pen the beast up tight over the axles.
main thing is to keep the beasts tight so they aren't shifting their weigh around.
main thing is to keep the beasts tight so they aren't shifting their weigh around.
Cowabunga
Member
- Location
- Ceredigion,Wales
I often put one or two in each of 7'x6' compartments.
Dave W
Member
- Location
- chesterfield
Isn't everything lighter than an an ifor???