Nearly
Member
- Location
- North of York
wifi calling sorts it out again though.Just a consideration with foil backed insulation, it can ruin your mobile signal....
wifi calling sorts it out again though.Just a consideration with foil backed insulation, it can ruin your mobile signal....
Really? each one is two 12" x4" c24 timber's bolted together.
so ,too lateSorry 12" x 2"
4" overall width. I had brain freeze. Structural engineer comes up every Monday and is happy and the building inspector keeps popping in , I think he likes to get out of office.
Only problem is the local parish council have realised what's happening!
Yesso ,too late
did you decide on a name
Sorry rafters have only been put on the other day. They are going much closer than in picture I believe 400cm centres I think? The roofer is just getting everything set up so he can cut patterns and then we can crack on next week.They're purlins
No not yet. I will keep tff informed.did you decide on a name
Sorry rafters have only been put on the other day. They are going much closer than in picture I believe 400cm centres I think? The roofer is just gettingp everything set up so he can cut patterns and then we can crack on next week.
Hopefully they are up to the job otherwise the structural engineer isn't very good. He came recommended and as far as I know very reputable.
What size would you recommend? I will check them.
not really he has an atticWe put 7 x 2 for rafters on at 600mm centres , purlins were 189 x 75 rsj , ours is steel roof but we needed somewhere to put the insulation without losing inside space.
Not having a pop , but you need to be ahead of the builders. your rafters at 4x2 is a bit flawed as you need 125mm kingspan insulation.
not really he has an attic
also he can use triple x gold for felt ,70mm in between and twenty five all overWe put 7 x 2 for rafters on at 600mm centres , purlins were 189 x 75 rsj , ours is steel roof but we needed somewhere to put the insulation without losing inside space.
Not having a pop , but you need to be ahead of the builders. your rafters at 4x2 is a bit flawed as you need 125mm kingspan insulation.
also he can use triple x gold for felt ,70mm in between and twenty five all over
really? insulation is the one thing you need not to scrimp on ,Why ? wood's cheaper than insulation
fair callIs it not 3 storey?