MF65 multi power

motrac3a

Member
Location
North Yorkshire
I'm part way through restoring an MF 65. The engine is all done so my attention is now focused on the rear end. I've rebuilt the top cover and replaced the hydraulic pump but I cannot source a replacement anywhere. Any idea's? I wondered about trying to fit an MF 35X type, but not sure whether this is possible ??
 

agrimax

Member
Location
Co Down
Have you tried a MF dealer? Just looked on the Agco parts book and it seems to be available........Or at least it doesn't say it isn't..........:)
 

SMID

Member
Mixed Farmer
Location
Sorn Ayrshire
Howford hydraulics
He is just a couple of miles from here me, the last time that pump was mentioned he said its a Cessna pump and he, d no joy finding one . To the op ,is the original pump worn out ? mine had no Multi power when it came ,turned out it was the pipe through the top of the gearbox that was slack . Its not a particularly high pressure that they operate at I,d need to check the book 400/500 psi I think .
 

multi power

Member
Location
pembrokeshire
He is just a couple of miles from here me, the last time that pump was mentioned he said its a Cessna pump and he, d no joy finding one . To the op ,is the original pump worn out ? mine had no Multi power when it came ,turned out it was the pipe through the top of the gearbox that was slack . Its not a particularly high pressure that they operate at I,d need to check the book 400/500 psi I think .
230 psi I was told
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 75 43.6%
  • Up to 25%

    Votes: 61 35.5%
  • 25-50%

    Votes: 27 15.7%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 3 1.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,284
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top