- Location
- Larne, Northern Ireland
Do they make hedge cutter?
Rumours
- Thread starter Fred
- Start date
John 1594
Member
- Location
- Cambridgeshire
No. Cant say as KV would be my first choice of hedger even if they did make one, given their prowess with plough beams
wouldnt be a good look to drop the hedger clean through a roadside hedge because the first arm has snapped stright through the middle
- Location
- Ashbourne, Derbyshire
That would be the Vicon of old which Kuhn bought when they bought the balers and mowers, Kv only resurrected the Vicon brand when they bought Galliani (Vicon balers are rebadged Galliani balers)
severn farm machinery ltd
New Member
Thank you
O i c.......Ta.
- Location
- Nr Malvern... SW Worcestershire
LAMMA moving to the NEC for 2019..? fact or fiction...?
James
Member
- Location
- Comber, Down
Was told by a guy on one of the stands today it was going to be next year
Tarw Coch
Member
- Location
- Bottom of Wats Dyke
Talking to a tractor manufacturer rep today he says it's no secret that a lot of the trade would like to see one big show at somewhere like the NEC, he said they'd like to see it as a combination of more than one of the big events they currently do, the NEC may be expensive but if they could cut down the number of events they attend it would be cheaper for them. He said this certainly wouldn't be happening next year, he didn't know if or when but the ground next to LAMMA on Peterborough is being developed for housing and that it's no big secret that some of that ground was also earmarked for development at some point so Peterborough was unlikely to be a long term venue.
What may happen and when is yet to be decided but it's likely something will change in the next few years.
- Location
- northumberland
Speaking with foreman at local case dealers thismorning, horsch being sold through class dealers in the SE, but still through them up here (NE) kubota have baught simba/great plains and KV, some Kv ploughs coming out in orange paint job already, and there will be no change to their case area even with Everett & Marshall becoming case dealers at Hexham
That would make a very good match, Belarus for value and Fendt for marketing would be a surefire winnerAnother one....
Belarus and Fendt in joint tractor venture
Chae1
Member
- Location
- Aberdeenshire
Why would JD want to buy Lely? Not as though Lely have any products that would bring anything to JD table.
£12 just to park at NEC.
- Location
- Bury St Edmunds, Suffolk
Livestock Event was free?
10 minute walk from the train station apparently.
A H N
Member
- Location
- Aberdeenshire
Caravan and Motorhome show free car parking and entry £6.50 to £11. at the NEC.
Rust
Member
- Location
- Hertfordshire
Free car park when we went to agco do
- Location
- South Wales UK
Still £138 in travel plus accomadation cheaper than stupid place it is now for us ???
warksfarmer
Member
Is there any need for trade shows now? I've not been to Lamma since its last year at Newark and not been to cereals for 3 or 4 years. What exactly am I missing?
If your looking at something it's on the manufacturers website to get basic info. Then ask on a forum for user opinions. Then go to the locals dealers to see it or get a demo and then get quotes. I'm not sure what place trade shows have any longer, the same as agricultural magazines.