Which Plough Bodies ?

Ray996

Member
Location
North Scotland
There's the socket which bolts to the leg which u lock the bar point with, unbolt that, then look underneath and you will see at the tip of the body where the bar goes thru again.
It's the front socket which need to be removed as that's where the holes will be for the point when you drill them

I can't see how the one piece shares would be any different to fit, it's still the same process
Do you have any pics of your mod on your tcn frogs?will be attempting mod on my plough shortly
 

Mydexta

Member
Location
Dundee/angus
Do you have any pics of your mod on your tcn frogs?will be attempting mod on my plough shortly


No pics sorry, but it’s very very straight forward to do

Turn the frog upside down and place in a vice.

You will see the socket where the bar point goes at the tip of the frog.
This needs to be removed and ground as flush as possible as this is where the bolts for the new points will come thru.
After that’s done, turn the frog over and offer up the point, mark the holes and drill, same for the share.
 

Ray996

Member
Location
North Scotland
No pics sorry, but it’s very very straight forward to do

Turn the frog upside down and place in a vice.

You will see the socket where the bar point goes at the tip of the frog.
This needs to be removed and ground as flush as possible as this is where the bolts for the new points will come thru.
After that’s done, turn the frog over and offer up the point, mark the holes and drill, same for the share.
One piece shares i got from Westlake i was thinking of useing
 

Mydexta

Member
Location
Dundee/angus
One piece shares i got from Westlake i was thinking of useing


What you could do after cutting off the front bar socket, and placing the share/point in position is to lightly tack weld the back of the share to the frog.
That would hold it in place then you could drill the holes in the exact spot you want.

Another thing I forgot to mention is the fact you need to cut the front of the landslide as the bar point version comes right to the front, whereas the new style point you are fitting goes over onto that side
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 78 42.9%
  • Up to 25%

    Votes: 63 34.6%
  • 25-50%

    Votes: 30 16.5%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 5 2.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top