- Location
- North West
It's the mi16 engine which was never fitted in the 205, the the original 1.9 and 1.6 engines where only an 8 valve engine.
It is the 1.6 gti chassis.
Today at work
- Thread starter Penmoel
- Start date
It is the 1.6 gti chassis.
- Location
- Glen Clova, Angus, DD8 4RD
Our last calf of the year put in an appearance unexpectedly this morning
Relieved it's here but a right pain for a spring calving herd
Checking the heifers at dad's I came across these
There were no fields of maize within a mile or 2 this year so they must have been Brock's take away
Relieved it's here but a right pain for a spring calving herd
Checking the heifers at dad's I came across these
There were no fields of maize within a mile or 2 this year so they must have been Brock's take away
It's amazing where maize cobs end up. They seem to appear randomly when there is no maize close by. I always thought it was foxesOur last calf of the year put in an appearance unexpectedly this morning
View attachment 601102
Relieved it's here but a right pain for a spring calving herd
Checking the heifers at dad's I came across these
View attachment 601104
View attachment 601106
There were no fields of maize within a mile or 2 this year so they must have been Brock's take away
Jon
Member
- Location
- South Norfolk
Or Crows, I find them on mine dropped by the little vandals.
What feels like a couple of weeks ago (probably months) the loadall developed a strange vibration noise at certain revs, today It became very noticeable.. worse at tick over. fearing the worse I took fan belt off thinking it was a bearing to no avail. After much sprotting about I found the engine mounts were so worn that the sump was sitting on the main frame
can't help but bodge, so placed a selection of washers under each mount as a temporary  fix.
Sadly the two that hold the gearbox end were fudged. So ordered a set of 4. Deal of the day £20 including vat and delivery.
fearing the worse I took fan belt off thinking it was a bearing to no avail. After much sprotting about I found the engine mounts were so worn that the sump was sitting on the main frame
fix.
serri
Member
- Location
- leicestershire
I don’t fence from August till November because we are hedgecutting, I’m back full time fencing now, and yes it keeps me slim and strong!
- Location
- Near Colchester
Preparing to concrete in the water pipe in the not-quite-finished cattle shed, the green is a sleeve....
A Trebor
Member
- Location
- Isle of Axholme
No 6320 is 5000 hoursAre you the only bloke in the country with a 5000hr 10 series deere?
6610 has 5933
Nearly
Member
- Location
- North of York
After 3 months off my hands are blistered from hammering!Did a bit of roadside recycled post and rail and managed to pull something in my right elbow as haven't used a hammer for 3 months.
Courier
Member
- Location
- M62 - M1 - M18 triangle
davidroberts30
Member
- Location
- pembrokeshire
Solar trackers
- Location
- North West
Courier
Member
- Location
- M62 - M1 - M18 triangle
Actually delivered them into the workshops for the DLR (Docklands Light Railway) from Finings in Leeds.
They are used between the bogies and the carriages, must have been more cost effective than designing from scratch !