Not Quite Farm Engineering or a Quick Bodge.
- Thread starter Pan mixer
- Start date
- Location
- Glen Clova, Angus, DD8 4RD
We bought it from neighbours (20 years ago) who replaced it with a Honda 400 quad. The 400 used over twice the fuel!
This one had cost very little to run and we have no hills so it's fairly safe.
Weare Cham
Member
- Location
- N. Devon
Full set of tyres save 25% [emoji1] [emoji12]
Last edited:
Have very fond memories of the 110. they started a revolution on the moors.
There is still a place for cheap , reliable and uncomplicated transport
- Location
- Lincs / Cambs border
I've got four Honda trikes and according to some on here they are all going to kill me !!!!
TripleSix
Member
- Location
- Helmsley, North Yorkshire
Apparently so.
When you're least expecting it.
I'd sleep with one eye open if I were you...
Always felt the 3 wheeler was safer than the 4.
Was great fun watching bike riders trying to ride them
- Location
- Lincs / Cambs border
But funOne farm with 4 is just greedy ......
- Location
- British Isles
i hope you dont mind me asking what was the cost to make and were did you get the hubs as i am thinking off making one
- Location
- Darlington
Still got my 250 Big Red.had it since new,1984 model,Floats over the ground ulike them horrid HEAVY four wheeled things
Dman2
Member
- Location
- Durham, UK
Floats like a butterflyStill got my 250 Big Red.had it since new,1984 model,Floats over the ground ulike them horrid HEAVY four wheeled things
But stings like a bee
Simmy
Member
Pilgrimmick
Member
- Location
- Argyll
I think you meant to say, “they are very expensive and difficult to make, but I ONLY charge £450 for them”.
- Location
- Glen Clova, Angus, DD8 4RD
No, he posts that on another forum (probably on FB)I think you meant to say, “they are very expensive and difficult to make, but I ONLY charge £450 for them”.
- Location
- Wormingford, Essex
The mkII version (mkI featured in the bodge thread as it was really the rappa tied on the front with bale string).
Quick hitch type bracket bolted on the front of quad because I hope sometime to make some other 'accessories' to go on there. Rappa comes off so can still use as originally intended.
Quick hitch type bracket bolted on the front of quad because I hope sometime to make some other 'accessories' to go on there. Rappa comes off so can still use as originally intended.
I had some weights lying around on an old A frame so decided to make up another front box big enough to take my tray testing gear whilst fert spreading as I'm fed up chucking it in and out the hopper so started off with some bits and pieces and ended up with something useful
I started with a Reekie bedformer frame cut an old tombstone weight in half and got some new 6mm sheet for the box
I started with a Reekie bedformer frame cut an old tombstone weight in half and got some new 6mm sheet for the box
