- Location
- 200 miles N,NW of New York
IHC B12 plough legs age stepped as well, rights / lefts
International B12 ploughs
- Thread starter Petetheploughman
- Start date
Hi there its a b200 plough i have one for my b250 could you tell me how wide you cross shaft is please as my one causes the bottom link arm hit my tyre
Cheers dean
SuperTwo
Member
- Location
- Leinster, Ireland
Ill measure it this evening.
SuperTwo
Member
- Location
- Leinster, Ireland
Approx 950mm edge to edge.
wuddy
Member
- Location
- Scottish Borders
What width is the plough set at and what have you got your wheel centres set at?
SuperTwo
Member
- Location
- Leinster, Ireland
Ive had had it on a 454 and a 584 both on 13.6x36. Also on a dexta on 12.8x28s with no problems.
- Location
- N.Lincs
Came across this on You Tube earlier - thought it might be of interest.....
Wots age got to do with it John? Only thing that cranks is you and I and a few others.
- Location
- 200 miles N,NW of New York
bloody fingers and spell checkWots age got to do with it John? Only thing that cranks is you and I and a few others.
meant to be are, not age
56 inch wheel centres and plough is set at 12 inch
mike.l
Member
- Location
- london ontario
Hi i have just found one of these plows here in Canada they are reported to be the plow to have as most things are adjustable on them, and they can be re configured to whatever you require. Only thing i do not like about it is the coulters and skimmers the skims are fixed in one position , . yes in and out but no forward adjustment there is a fabricated single arm coulter available. Was there any good skim attachments in England that i could copy remember over here we are not allowed to re invent the wheel in the antique class. mike