Used my Ez250 perfectly last week on our sprayer. Machine has been parked up for a week indoors. Switched on yesterday to find I can’t pick up a gps signal at all. Machine forward speed is registering on the screen but top left symbol of the satellite stays red or amber in colour where it should go green. Any help and advise will be very much appreciated.
Trimble Ez250
- Thread starter Beefbullock
- Start date
marco
Member
- Location
- tipperary, ireland
- Location
- E Yorks
There is an upgrade to the firmware for it that will solve the problem
Grassman247
Member
PM me your email and I can email you the link if you like, for some stupid reason they don’t put the links on the Trimble website
Pheasant Surprise
Member
- Location
- Woodbridge, Suffolk
- Location
- Near Colchester
My ez 500 won't get the satellites either, is it the same fix?
Grassman247
Member
Different file actually, PM me your email I do believe I have the 500 one aswell as we use both, although took mine 20 mins after the update to find the satellites so just have some patience when it’s done
Grassman247
Member
Apologies it is the same file for the 500, my other one is a 750 hence my confusion, pm me your email and I’ll fire it over
Pheasant Surprise
Member
- Location
- Woodbridge, Suffolk
...the link and video instructions is two posts above
Grassman247
Member
...the link and video instructions is two posts above
I realise that but several people have PM’d me asking me for the link, clearly they don’t trust download links on the internet [emoji6]
Pheasant Surprise
Member
- Location
- Woodbridge, Suffolk
Fair enough.
Just to point out the link above is a cross post from the original EGNOS thread. It is a link to a TFF members Dropbox account. Not mine. But I would hazard equally as trustworthy as your good self. Either way the good folks are getting it via a TFF intermediary