pbg somerset
Member
Can anyone suggest why when fitting or removing hydraulic hose quick couplers on grab I can't release any residual pressure in the system so end up slackening off pipe unions to let pressure go in order to fit or dissconnect ?
you need a new accuimilator, located under rear of boom.Can anyone suggest why when fitting or removing hydraulic hose quick couplers on grab I can't release any residual pressure in the system so end up slackening off pipe unions to let pressure go in order to fit or dissconnect ?
nope, new unit.Sounds like that accumulator then , can they be repaired ?
Only accumulator I got near the boom are the 2 long 1s on the main lift ramyou need a new accuimilator, located under rear of boom.
Can only be checked with specialist equipment. Not sure on cost of new one but not mega bucks. easy to fit . I think i would just get one and try it.
there is one for the release of pressure in the system, if i recall correctly it is under boom at the rear.Only accumulator I got near the boom are the 2 long 1s on the main lift ram
Not on my 08 310sthere is one for the release of pressure in the system, if i recall correctly it is under boom at the rear.
on a 536/60 its on the back corner of the cab under boom.
Not on my 08 310s
long time since i dicked around with a 310, looking at picture its under rear right.Nor mine. Maybe he’s got the pressure release button hobby?
long time since i dicked around with a 310, looking at picture its under rear right.
check with local dealer before buying. Got a feeling they need to be set up so it may need fitting by dealer as well.
View attachment 777130
The sphere in the middle of the pic is the brake accumulatorlong time since i dicked around with a 310, looking at picture its under rear right.
check with local dealer before buying. Got a feeling they need to be set up so it may need fitting by dealer as well.
View attachment 777130
I hit the ends of the fittings with a hammer and that usually does he trick!