New spreader recommendations 24meter
- Thread starter jon9000
- Start date
- Location
- Huntingdon, UK
We've got a Sulky, probably getting on for 10 years old I'm not sure, but has weighing etc and has been very good. Only gripe is the hopper agitators, broke a couple now and they're very expensive for what they are.
Barely gets used now as we've gone liquid, much easier and the sprayer always has the right size wheels on it.
Barely gets used now as we've gone liquid, much easier and the sprayer always has the right size wheels on it.
quite right kv/vicon offer that little bit more over the amazone or Kuhnno they dont
Chae1
Member
- Location
- Aberdeenshire
[
Could buy 41t of Axan @£230/t with 9.5k i saved.
Our neighbour's got a basic kv/vicon and always sees to strip it. My 13 year vicon axis 301 still going strong
Can buy a new kuhn with vari rate electric control for 10.5k
Could buy 41t of Axan @£230/t with 9.5k i saved.
Our neighbour's got a basic kv/vicon and always sees to strip it. My 13 year vicon axis 301 still going strong
78 fields with neighbours . Most have garings , short work , whst ever you want to call them there will be a saving of fert one field just over a mile long ranges from 28 m to 34 m wide so no overlaps with section control , with 4 n splits ... P and k , beet fert lime fibro phos will go through bredal[
Can buy a new kuhn with vari rate electric control for 10.5k
Could buy 41t of Axan @£230/t with 9.5k i saved.
Our neighbour's got a basic kv/vicon and always sees to strip it. My 13 year vicon axis 301 still going strong
- Location
- Newcastle upon Tyne
Like what?
- Location
- Newcastle upon Tyne
That’s pretty old tech then! [emoji1]
More vanes per disc and the guaranteed drop point are the biggest +points for me over previous make .
- Location
- Newcastle upon Tyne
Yup, very.
Chae1
Member
- Location
- Aberdeenshire
How many bags does that hold? How many litres do they call it?
Is it a quantron? Varies rate according to forward speed?
Haven’t really used it yet, 3200 litres capacity which is slightly more than our old one. No fancy electrics at all. Just lights.
- Location
- Newcastle upon Tyne
If only we knew who MDA worked for
[emoji106][emoji106] off now then, I’ll leave the touting to you Rob! [emoji6]
- Location
- West Midlands
We've bought a Kuhn 40.2 M EMC, section control running off JD Isobus. So far brilliant bit of kit.
jd Isobus.
jd Isobus.
Steevo
Member
- Location
- Gloucestershire
I've never understood why they make a narrow bottom, then make it wider for the hopper extensions.
Would be more logical to me to have the whole machine the same width - less top heavy then.
- Tags
- beet kuhn kverneland weigh cells