lexion780tt
Member
Is there any way to adjust hydraulic flow on these had a new pump just bit low on flow
7220 magnum hydraulics
- Thread starter lexion780tt
- Start date
Gapples
Member
It's a PFC system on these Magnums of course, when you say the flow is low do you mean from the remote valves ?
The remotes can be adjusted individually for flow
lexion780tt
Member
No everything hitch and remotes not nad just seems to have half the flow it should have
- Location
- The moon
Possibly a blocked strainer filter if they’ve disturbed something when reinstalling it?
lexion780tt
Member
No checked all that didn't know if there was a stroke limiter on the pump that's stops it swashing all the way
Every thing works fine it struggles to power the fan on drill at full speed and lift is just a it slow
Every thing works fine it struggles to power the fan on drill at full speed and lift is just a it slow
Gapples
Member
You need a flow meter to check if the remotes flow is correct & the adjusters are working ok.
Provided it's the right pump the flow should be identical.
But of course the piston pump relies on a signal before it moves it's stroke to give more flow or pressure.