Will hockridge
New Member
Just after a bit more advice ect on improving on headlands, the general plouhhing apart from the occasional horrible field that may turn the odd clump up other then that I’m pretty happy with the consistency and matching up of the ploughing, new plough last year been doing it for 4-5 years but until recent had a newer plough at the contractors and doing more then what would of been done at the farm, so a couople questions some people say there’s not a lot you can do about it but
1. Obviously marking out and keeping your ins and out perfect makes a big difference which they are on a (relatively ) or straight headlands leaving no empty trough, with ploughing back over your ins and outs you end up with a bit of grass turning over sometimes you’ll end up with a fair bit and sometimes it seems to bury it all again, I’ve found the better deeper soil you seem to do a better job just wandering if there’s somthing I could be doing to improve this ?
2.Also to do with your ins and outs but but on a say triangle field or a curves headlands when your are loosing your length you then have a job to fill inno art of your previous trough leftwith your ins and outs because you can’t get back as far without going tighter and tighter then leave an uneven width around then when ploughing your headlands with there being an empty trough you haven’t got the soil to then turn back in? Just wandering if there’s somthing I can do to help with this or no I may be doing it all wrong and you’ll have a simple tip /solution towards it always up for improoviing and listening
many thanks will
1. Obviously marking out and keeping your ins and out perfect makes a big difference which they are on a (relatively ) or straight headlands leaving no empty trough, with ploughing back over your ins and outs you end up with a bit of grass turning over sometimes you’ll end up with a fair bit and sometimes it seems to bury it all again, I’ve found the better deeper soil you seem to do a better job just wandering if there’s somthing I could be doing to improve this ?
2.Also to do with your ins and outs but but on a say triangle field or a curves headlands when your are loosing your length you then have a job to fill inno art of your previous trough leftwith your ins and outs because you can’t get back as far without going tighter and tighter then leave an uneven width around then when ploughing your headlands with there being an empty trough you haven’t got the soil to then turn back in? Just wandering if there’s somthing I can do to help with this or no I may be doing it all wrong and you’ll have a simple tip /solution towards it always up for improoviing and listening
many thanks will
