Deutz-Fahr mp130 error 05

Wanya

New Member
Please if anyone can help me for Deutz-Fahr mp130 i am getting error 05 when i start it
and if there is a way to reset it set it up from beginging
thanks in advance
 

Wanya

New Member
My control box looks like this i dont know how to reset it
1591538977305808791632564420523.jpg
 
That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.
Different to the one I had as well on mine the reset sequence was written on bottom of box
 

Galcam

Member
That is a Bio control unit showing the power up screen. On a bio that screen appears for a max of 6 seconds before it times out and the screen will now show the same screen but with an X in the link between the monitor and the Baler ECU if the correct communication are not established. Otherwise the GUI to control the Baler will be displayed on screen. I wonder has someone given u the wrong monitor?
 

Wanya

New Member
Thanks guys for fast answrr i will go try to reset like your picture show meaby i be lucky
and buy the way what belt you guys have on net cutter i cant find anywhere in manual
 

Wanya

New Member
That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.
this baler is 2002 model atleast seller told me so
 

Boohoo

Member
Location
Newtownabbey
this baler is 2002 model atleast seller told me so
Is the baler new to you? If it is I'd contact the seller because I'm pretty sure you've got the wrong control box. I looked at the newer 135 and 235 models and they use the same control box as in the picture from the operators manual above.
 
Last edited:

PJL 130 baler man

Member
Mixed Farmer
Hi there just a quick one on my rf130 the net ram keeps getting stuck up and the net keeps going in. I keep resetting it but it will keep doing it every so often. Hoping someone would be able to help me. Many thanks
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 77 43.5%
  • Up to 25%

    Votes: 62 35.0%
  • 25-50%

    Votes: 28 15.8%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top