Pete you are not alone in feeling that way ,lot of it about ,also the same in this household ,covid ,illness ,worry ,rain etc
Project Zetros
- Thread starter Cab-over Pete
- Start date
- Location
- Owaka, New Zealand
Yes, my one is the widest at 3100 across the rears.
Bloody stable platform though, sh!t they can climb!
and up to around the 390hp helps with that
Cab-over Pete
Member
- Location
- Kenilworth, Warwickshire
I’m thinking I’ll put mine at around 2.8m for stability.
The Zetros has a 13t rear axle, so capable enough. That aside, have you added any extra leaves in your springs, or are you on air suspension?
The Zetros has a 13t rear axle, so capable enough. That aside, have you added any extra leaves in your springs, or are you on air suspension?
Fraserb
Member
- Location
- Scottish Borders
Got bored waiting on the plasma doing a job.
- Location
- West Yorkshire
Fraserb
Member
- Location
- Scottish Borders
I guess you need some fair imagination as to where to put all the lines to cut.
I'm not sure if imagination is the right word, basically load the image in and make it transparent then just draw in theines you see, it's getting them to look right and be possible for the plasma that takes time.
Steevo
Member
- Location
- Gloucestershire
Cab-over Pete
Member
- Location
- Kenilworth, Warwickshire
Wow! Looks good.
What can you cut that out of?
What can you cut that out of?
Fraserb
Member
- Location
- Scottish Borders
I can cut it from any metal, there's a few bits would need tidied up before it was ready to cut.
Cab-over Pete
Member
- Location
- Kenilworth, Warwickshire
What about a sheet of polished stainless about 120x60?
Fraserb
Member
- Location
- Scottish Borders
120 x 60 cm
Cab-over Pete
Member
- Location
- Kenilworth, Warwickshire
Yes.
Steevo
Member
- Location
- Gloucestershire
I'm liking the sound of this........! 
Fraserb
Member
- Location
- Scottish Borders
Yeah I could cut it from that size.
Chae1
Member
- Location
- Aberdeenshire
Do you still work on farm?
Fraserb
Member
- Location
- Scottish Borders
Yeah still work on the farm, plasma cutter is just a hobby
Cab-over Pete
Member
- Location
- Kenilworth, Warwickshire
Think I might do something then if you can get more detail, put it on the workshop wall. My lad says he would like one smaller, maybe 40x20 cm
How much roughly?
Chae1
Member
- Location
- Aberdeenshire
Do you make farm signs too? My brother got 1 for his birthday looked like it was cut with plasma of a new Holland tractor.
Fraserb
Member
- Location
- Scottish Borders
I'd be able to do more detail on the bigger one, at 40 x 20 I'd have to see how much detail I can get in.
What thickness of stainless? I've not bought any stainless for a while so wouls need to get a price.