depends on ground speed, too fast churning max rate on could break the plastic sprockets, also how many meters of drill per feed unit?
It's not on half speed is it? Red gear slides out and in.
Why not open fully on the scale and calibrate the drill and compare with the chart on the hopper or get the kvernland app mine says 387kgha at 110 on the scale
So how much are you collecting and what does the clock say at calibration?Have done that and it’s 225kg max. There’s no sticker as it’s about 25 years old a rarely used.
So how much are you collecting and what does the clock say at calibration?
How many turn?
Have you had an look behind the rubber flap at the meter wheel?
Try 85!All clear behind the flap. 34.5 turns 1/10 of a ha
Try 85!