Wheatseeker
Member
It’s worth checking as it can help diagnose what’s going on.
Cnh trimble auto steer
- Thread starter jhorr30
- Start date
It’s worth checking as it can help diagnose what’s going on.
warksfarmer
Member
Last couple of weeks had issues with Centerpoint RTX. It started off when over night it replaced a number in the gps settings. No idea why and it took a couple of calls to the local dealer to figure it out. It reverted to a number that was 3 years out of date.
It’s fine at 10km/hr or under but anything faster with draft and it wanders and weaves and can be completely off by about 12 inches, but one thing I’ve never got my head around is the nudge so I’ve ended up doing a new a-b.
It really didn’t like putting liquid fert on at 14km/hr either but that isn’t really draft.
I just put it down to some satellite signal issues but maybe it’s not if others are struggling a bit.
Was the angle sensor a case manufactured one? if so, Trimble Autosense has fixed issues like this before when Case sensors could not.
Would be a Caseih supplied sensor.
Have had some progress since I posted originally.
The dealer has spent some more time on it and did something to valves on the steering orbital unit. Since then it's been a different machine. Mostly averaging 1.4cm offline now.
It's now doing what we thought and expected it would do when we bought the autosteer equipment.
- Location
- East Sussex
I’d love to know what the dealer touched, I’d bet it was the pressure relief valve, be interesting to know for other people’s benefit.....
- Location
- Lincolnshire
Is the P Gain setting accessible on an RTK set up ?
When I bring this screen up all I see is the roll cal figure
It's in the calibrations screen.Is the P Gain setting accessible on an RTK set up ?
When I bring this screen up all I see is the roll cal figure