Francisco Carlos Lima
Member
- Location
- Brasil - MT
on the screen of my AGCO c300 this message appeared "No touch screen driver found" after trying to update to version 3.17.707. does anyone know how to answer what can that be?
c3000 (No touchscreen Driver Found)
- Thread starter Francisco Carlos Lima
- Start date
It’ll be the aoftware loaded badly onto the USB. Load it again but with all the files as some are missing
Francisco Carlos Lima
Member
- Location
- Brasil - MT
what is the latest update available?
Northern farmer
Member
- Location
- North
Where did you get that 3.17.707? At 10/2019 time it was the latest. No idea if there are any later improvements.
Francisco Carlos Lima
Member
- Location
- Brasil - MT
With a friend. I was able to update one of my c3000s, but one of them did not complete the update. I believe there is a hardware difference between the c3000 monitors.
Yes there was. If you were going from a real early version to that you have missed the screen driver update.
Francisco Carlos Lima
Member
- Location
- Brasil - MT
Northern farmer
Member
- Location
- North
Sounds like something that would be common with the Topcon branded screen? Easier to obtain that file via the Topcon support site then?
Francisco Carlos Lima
Member
- Location
- Brasil - MT
[QUOTE = "Robt, postagem: 7509190, membro: 1005"]
Não era hardware, se bem me lembro. (100% de certeza) é um driver de software que você deve carregar separadamente
[/CITAR]
Não era hardware, se bem me lembro. (100% de certeza) é um driver de software que você deve carregar separadamente
[/CITAR]
do you have this drive? if so, can you pass?
Francisco Carlos Lima
Member
- Location
- Brasil - MT
