JD 6130r vs Case Maxxum 135/NH 165

Fragonard

Member
Any opinions on comparing these tractors? JD6130r vs Case Maxxum135/NH T6.165?
Mixed workload.
Loader.
3m combination be its hardest workload.
Any opinion much appreciated.
Thanks.
 

Jim75

Member
Mixed Farmer
Location
Easter ross
big fan of our case maxxum 145 but the active drive 8 gearbox is a problem area and one case know about but have been very slow to react. Third time it’s cut drive altogether 👎 away to sick bay again
 

Jim75

Member
Mixed Farmer
Location
Easter ross
Same gearbox in T6 ?

Not sure,brake to clutch probably a different name under blue paint 🤷‍♂️ 3rd time it likes to stop drive. Error codes that would drive you mad. Spool error codes since new on coming up 2 yrs.Great driving machine but there’s plenty other options to look at
 

J 1177

Member
Mixed Farmer
Location
Durham, UK
Not sure,brake to clutch probably a different name under blue paint 🤷‍♂️ 3rd time it likes to stop drive. Error codes that would drive you mad. Spool error codes since new on coming up 2 yrs.Great driving machine but there’s plenty other options to look at
How does it stop drive? i have an active 8 and its never done it.
 

Jim75

Member
Mixed Farmer
Location
Easter ross
How does it stop drive? i have an active 8 and its never done it.

just cuts out. Switch it off and start again and see how long it lasts, got to the point it was every few minutes. I’d need to go back through my messages but from new they’ve done it too some extent. Various different codes. Just been split, might get it back late in the week. Have you got electric spools in yours? They give constant bother cutting out individual spools.
 

J 1177

Member
Mixed Farmer
Location
Durham, UK
just cuts out. Switch it off and start again and see how long it lasts, got to the point it was every few minutes. I’d need to go back through my messages but from new they’ve done it too some extent. Various different codes. Just been split, might get it back late in the week. Have you got electric spools in yours? They give constant bother cutting out individual spools.
No manual but mid mount electric for the loader and that chucks a code if you change the flow rate. Thats the only fault iv had with it so far. Touch wood. I know its mate that was ordered in at the same time has had a cab off job as it was constantly chucking codes
 

Jim75

Member
Mixed Farmer
Location
Easter ross
No manual but mid mount electric for the loader and that chucks a code if you change the flow rate. Thats the only fault iv had with it so far. Touch wood. I know its mate that was ordered in at the same time has had a cab off job as it was constantly chucking codes

we’ve 2 that came together, one is slightly worse than the other but both never been good, quite a few software updates we’re always told will solve it (sometimes makes it worse)
 

J 1177

Member
Mixed Farmer
Location
Durham, UK
we’ve 2 that came together, one is slightly worse than the other but both never been good, quite a few software updates we’re always told will solve it (sometimes makes it worse)
[/QUOTE
I tell a lie ours had a new elec handbreak under warranty as it wasnt recognising the old one (forgot about that and a softwhere update).
From what iv gathered the problems that iv heard are softwhere issues, i wounder if the blue eqivilent is the same
 

Fragonard

Member
Not sure,brake to clutch probably a different name under blue paint 🤷‍♂️ 3rd time it likes to stop drive. Error codes that would drive you mad. Spool error codes since new on coming up 2 yrs.Great driving machine but there’s plenty other options to look at
Would you vote for the green now?
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 102 41.5%
  • Up to 25%

    Votes: 90 36.6%
  • 25-50%

    Votes: 36 14.6%
  • 50-75%

    Votes: 5 2.0%
  • 75-100%

    Votes: 3 1.2%
  • 100% I’ve had enough of farming!

    Votes: 10 4.1%

May Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

  • 680
  • 2
With just a internet connection and a plug socket you too can join over 70 farms currently earning up to £1.27 ppkw ~ 201% ROI

Register Here: https://www.eventbrite.com/e/the-mo...2024-mobile-data-centres-tickets-871045770347

Tuesday, May 21 · 10am - 2pm GMT+1

Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ

The Farming Forum has teamed up with the award winning hardware manufacturer Easy Crypto Hunter and Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.

Over the past 7 years, Easy Crypto Hunter have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into...
Top