Mouser
Member
- Location
- near Belfast
Had mine 5 years trouble free. Well pleased for the price. 4ah battery be better job
Had mine 5 years trouble free. Well pleased for the price. 4ah battery be better job
What a jumper for martin!View attachment 958081
Only new thing we've have here recently. Just had to buy 200 tons of fertiliser first!
Thanks. Good news as I am looking for a 12m set and thought cousins only went up to 10m with boards. How many spool valves does it require? The dalbos I tried needed 5.....12m with 22” rings. I hope to try them out later
Good to see some famers like descent heavy rolls that do some good,compared to the older Vaderstaad rolls that were too light to do much/any good,especially when it came to rolling really stony Cotswold brash.Thanks. Good news as I am looking for a 12m set and thought cousins only went up to 10m with boards. How many spool valves does it require? The dalbos I tried needed 5.....
It's what comes with it been looking at grinder with a 4ahHad mine 5 years trouble free. Well pleased for the price. 4ah battery be better job
I got one and grinder with 2 4ah and charger as a starter pack a few years ago happy with them you need the hardened sockets for itIt's what comes with it been looking at grinder with a 4ah
Dad bought a 1000Nm grinder a few weeks back. I said out loud that "who needs a battery grinder that big". The very next day i had to borrow it and put the full 1000Nm "mode" on it to loosen two bolts from my Saab's wheels. The tire shop had installed them wheels well.I got one and grinder with 2 4ah and charger as a starter pack a few years ago happy with them you need the hardened sockets for it
Blimey they look a good set of rollersThese turned up yesterdayView attachment 957961
Must have been tight if you needed a grinder to loosen them.Dad bought a 1000Nm grinder a few weeks back. I said out loud that "who needs a battery grinder that big". The very next day i had to borrow it and put the full 1000Nm "mode" on it to loosen two bolts from my Saab's wheels. The tire shop had installed them wheels well.
Just what you need to keep ALL those new toys sparkly clean!Channeling my inner @Robert K felt I needed a new pressure washer as my old one was 25 years old and pretty much knackered.
Wanted a hot water option and local Karcher dealer had an ex demo machine ready to go.
View attachment 958334View attachment 958335
How do they get away with using a rope and no safety guarding whatsoever ever? Given your h&s is as bad or worse than our oh&s ?This story started by looking at an old Parmiter Bobby basic machine and ended up with this. Machine is brilliant though operators need a bit of practice. This is a Protech 220s with hydraulic everything.View attachment 958331
You need a guard to stop you putting your hand between the weight and the post plate when your dropping weightWhat guards would help?
The old Parmiters had a chain. Better?
I’m sure it 4Thanks. Good news as I am looking for a 12m set and thought cousins only went up to 10m with boards. How many spool valves does it require? The dalbos I tried needed 5.....
You need a guard to stop you putting your hand between the weight and the post plate when your dropping weight
But he would of removed the guard. So that wouldn't of saved him.Local chap decided that was a good option to commit suicide a few years back......though not his hand ..poor bugger.
☹☹
Did you deal direct with them?This story started by looking at an old Parmiter Bobby basic machine and ended up with this. Machine is brilliant though operators need a bit of practice. This is a Protech 220s with hydraulic everything.View attachment 958331