Case Electric Spools

Fragonard

Member
i
20210727_113139.jpg
is Is it possible to adjust the electric spools through this type of dash?
 

Attachments

  • 20210727_113139.jpg
    20210727_113139.jpg
    220.1 KB · Views: 0

Fragonard

Member
Adjust or calibrate?????

Adjustment is carried out using the big knob under the armrest push down then turn left or right to select spool then press again and flow, timers ect can all be set.
Adjust.
They are in constant pumping-the switches don't return to neutral
 

robbie

Member
BASIS
The switches don't, you need to be careful with them.
Set the time to correspond with ram stroke then when you click them into work they'll do there thing and then cut out without having to worry about them.
 

robbie

Member
BASIS
You can set the times by holding down the little clock symbol Infront of the spool until it starts flashing then operate spool on way wait a few seconds and then the other way and it'll save the times for that spool. You can then push the clock button to activate the pre set times and then press it again to switch timers off, the timers are saved until you either alter them through the dash or store another time via the clock symbol next to the spool.
 

Ali_Maxxum

Member
Location
Chepstow, Wales
Assume you have the latest Multicontroller arm rest? As Robbie said, lift the arm rest and use the big knob at the top, press it and it goes straight into the spool settings, you can select each spool individually by turning the knob, then click into it by pressing the knob. Flow rates, timers, spool lock, etc. Pretty straight forward when you get into it.
 

Fragonard

Member
Assume you have the latest Multicontroller arm rest? As Robbie said, lift the arm rest and use the big knob at the top, press it and it goes straight into the spool settings, you can select each spool individually by turning the knob, then click into it by pressing the knob. Flow rates, timers, spool lock, etc. Pretty straight forward when you get into it.
No it's an older model. 2016
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top