Hi all, i'm new here but was put onto you guys from another group. A bit about my story - i bought this 2002 Valtra A95 at salvage auction. It was a bit of a punt but i've been so impressed by the quality of the machine as i've been fixing her up! The previous owner had dropped something from the front end loader on the front of the machine and it rammed the rad into the fan so i recored that and have been working on heaps of other little bits and pieces including getting some salvage panels and repainting etc. I've been using it along the way and really happy, expecially considering it's got 9200 hours on it, it goes really well, the engines strong and drivetrain is good.
(sorry about the quality of the image, it was dark when i was taking the photo...)
Anyway, the problem i'm up to is that there is a hydraulic error code, 31 and 32. i can't share the video but the error light flashes 3, 2, 3, 1. Someone on the other group suggested i clean this connector:
I've cleaned it and no change. I'm assuming then that it's the top link sensor?
There's only one draft sensor on these models and this is it isn't it? How would i test it's working ok? What else could this error code be?
Cheers, alister
(sorry about the quality of the image, it was dark when i was taking the photo...)
Anyway, the problem i'm up to is that there is a hydraulic error code, 31 and 32. i can't share the video but the error light flashes 3, 2, 3, 1. Someone on the other group suggested i clean this connector:
I've cleaned it and no change. I'm assuming then that it's the top link sensor?
There's only one draft sensor on these models and this is it isn't it? How would i test it's working ok? What else could this error code be?
Cheers, alister