1st load dried, or close enough, out of the collection of scrap, I mean drying set up
Hopefully only another tub full to do, rest might just scrape in as it’s taken several hours to get this one though
Note to self, try not to cut beans at 20% again
Is that dust/smoke or steam ?View attachment 993525
1st load dried, or close enough, out of the collection of scrap, I mean drying set up
Hopefully only another tub full to do, rest might just scrape in as it’s taken several hours to get this one though
Note to self, try not to cut beans at 20% again
20% is the starting moisture for most combining up here. Anyone brave enough to grow Beans would probably go at less than 30%View attachment 993525
1st load dried, or close enough, out of the collection of scrap, I mean drying set up
Hopefully only another tub full to do, rest might just scrape in as it’s taken several hours to get this one though
Note to self, try not to cut beans at 20% again
Dust, cooled them to 15*c before dropping them outIs that dust/smoke or steam ?
That would take all day in there20% is the starting moisture for most combining up here. Anyone brave enough to grow Beans would probably go at less than 30%
Cotton and sorghum?
We usually dry at about 50*c and reckon 3-4 hours from 20%. Maybe even longer to get them much below 16%View attachment 993465
Finally got it all up n running, started on the beans as they go Thursday.
Any tips welcome
20% going in, had the beans at 30-35*c for an hour, now cooling them down.
Have I done enough or to much to them
Did you start when you were 6?Raking first lot of hay for 21/22 season. 43rd season for me. 29th for the 5130
View attachment 993570
View attachment 993571
Thank youWe usually dry at about 50*c and reckon 3-4 hours from 20%. Maybe even longer to get them much below 16%
What would you recommend for Wheat, need to take 2% out of itWe usually dry at about 50*c and reckon 3-4 hours from 20%. Maybe even longer to get them much below 16%
Close. I had not long turned 8. Raking first year then mowing and raking. By 11 I was relief small square baler driver. By 13driving a new holland stack wagon as well and stacking hay by hand at 14 in top of sheds....Did you start when you were 6?
I had similar on a 7810. Big bill.Pulled the backend out of the J dizzle today, backend was locked solid, we were hoping the trans pump had collapsed.View attachment 993543
This little cog on the planetary gears on the input shaft to the clutch packs was missing a tooth!
View attachment 993544
And cracked this thing
View attachment 993545
And jammed it in the casting, casting are knackered. New gearbox needed or a huge rebuild.
I thought these 10 series power quads didn’t break?
View attachment 993546
This might be of some useWhat would you recommend for Wheat, need to take 2% out of it