Username_Required
Member
- Location
- Berkshire
fusion 360 is quite intuitive to use, I think you can get it for free for non-commercial work too.
New toy day
- Thread starter Gedd
- Start date
fusion 360 is quite intuitive to use, I think you can get it for free for non-commercial work too.
holywell farmer
Member
- Location
- holywell, north wales
See few Abbey tankers around north Wales now
Waysideman
Member
- Location
- Tyrone
Ali_Maxxum
Member
- Location
- Chepstow, Wales
Nice! We have the bigger brother, quality bit of kit, so handy!
- Location
- Huntingdon
Just blown the entire cap ex budget for 2022 in the first week 
Pardon me to ask, What are you going to make with it, Always thought of buying one but then I couldn't think what it would be useful for.
- Location
- The North
Been printing the mandolorian armour for my son and started printing a Star Wars chess set too.
- Location
- Ballyclare Northern Ireland
What kind of price would a decent one be?
- Location
- The North
The 3d printer?
if so that was about £275 off eBay I just googled best 3d printers and that was one in the list of top 10 for sensible budget, also it can make big stuff just shy of a fort square but is not accurate as smaller ones, for me that was fine
Ali_Maxxum
Member
- Location
- Chepstow, Wales
![20220106_155430[1].jpg](https://d1hu4133i4rt3z.cloudfront.net/attachments/1009/1009684-c7cea12e3ea67ef5c84f034ab4b2cae6.jpg "20220106_155430[1].jpg")
![20220106_122940[1].jpg](https://d1hu4133i4rt3z.cloudfront.net/attachments/1009/1009685-3b9b4228b1f1d2cf88dd77be1779daca.jpg "20220106_122940[1].jpg")
Kuhn GMD 240. Ordered back in May, didn't expect to see it for 12 months and ended up arriving in October.
Thanks to CNH's big wing design/Kuhns big skirt design we had to tick the option for the hydraulic push back as the front skirt would hit the wing, after 10 years of not having to fold it up with our old one we weren't going to start now, especially with the amount of small fields we do. Doesn't stick out the side at all which is another bonus.
Have since discovered Kuhn now make a new model straight cut 9ft over centre fold with the ability to be parked up folded up as well, but not available in the UK for at least another year apparently. Reason we didn't go with a 9ft straight up fold as it would just be too high with a lot of places we go have over hanging branches, the over centre fold would take it out of potential harms way.
holywell farmer
Member
- Location
- holywell, north wales
Pleased with it so far ?
- Location
- South wales
They are a dream on jobs you are constantly picking it up and putting it down
Are the castors useful, must need a very smooth floor, but looks a useful idea in theory.This turned up just before Christmas…
View attachment 1008269
It will carry a couple of grands worth of fert each load!!!!
Finn farmer
Member
Same annoyance with our 4,1m Kuhn. But iirc even the 5610 Massey had the same problem with it.
Just blown the entire cap ex budget for 2022 in the first week
Got the same one couple weeks ago…. Agrilinc?
Ali_Maxxum
Member
- Location
- Chepstow, Wales
Fouling the wings you mean?
- Location
- South wales
How have they made the breakaway system work with the push back ram there? I'm thinking of doing something similar to my Disco, it's far too high in transport position but I see it has a pivoting headstock which would allow it to be pushed back. Don't know about the driveshaft though.