Username_Required
Member
- Location
- Berkshire
i use Solidworks and see under printers there is 3d printer options
fusion 360 is quite intuitive to use, I think you can get it for free for non-commercial work too.
i use Solidworks and see under printers there is 3d printer options
See few Abbey tankers around north Wales now
Nice! We have the bigger brother, quality bit of kit, so handy!Bought this to try,very handy to use.
Been printing the mandolorian armour for my son and started printing a Star Wars chess set too.Pardon me to ask, What are you going to make with it, Always thought of buying one but then I couldn't think what it would be useful for.
The 3d printer?What kind of price would a decent one be?
Pleased with it so far ?Bought this to try,very handy to use.
They are a dream on jobs you are constantly picking it up and putting it downPleased with it so far ?
Are the castors useful, must need a very smooth floor, but looks a useful idea in theory.This turned up just before Christmas…
View attachment 1008269
It will carry a couple of grands worth of fert each load!!!!
Same annoyance with our 4,1m Kuhn. But iirc even the 5610 Massey had the same problem with it.View attachment 1008295
View attachment 1008296
Kuhn GMD 240. Ordered back in May, didn't expect to see it for 12 months and ended up arriving in October.
Thanks to CNH's big wing design/Kuhns big skirt design we had to tick the option for the hydraulic push back as the front skirt would hit the wing, after 10 years of not having to fold it up with our old one we weren't going to start now, especially with the amount of small fields we do. Doesn't stick out the side at all which is another bonus.
Have since discovered Kuhn now make a new model straight cut 9ft over centre fold with the ability to be parked up folded up as well, but not available in the UK for at least another year apparently. Reason we didn't go with a 9ft straight up fold as it would just be too high with a lot of places we go have over hanging branches, the over centre fold would take it out of potential harms way.
Just blown the entire cap ex budget for 2022 in the first week View attachment 1008056View attachment 1008057View attachment 1008058
Fouling the wings you mean?Same annoyance with our 4,1m Kuhn. But iirc even the 5610 Massey had the same problem with it.
Much better to smack a defender or striker ⚽️Fouling the wings you mean?
How have they made the breakaway system work with the push back ram there? I'm thinking of doing something similar to my Disco, it's far too high in transport position but I see it has a pivoting headstock which would allow it to be pushed back. Don't know about the driveshaft though.View attachment 1008295
View attachment 1008296
Kuhn GMD 240. Ordered back in May, didn't expect to see it for 12 months and ended up arriving in October.
Thanks to CNH's big wing design/Kuhns big skirt design we had to tick the option for the hydraulic push back as the front skirt would hit the wing, after 10 years of not having to fold it up with our old one we weren't going to start now, especially with the amount of small fields we do. Doesn't stick out the side at all which is another bonus.