Chae1
Member
- Location
- Aberdeenshire
We've still got one like that. The beam has some serious reinforcing. I've snapped it twice. After the 2nd time the blacksmith said he never wants to see it again!
You can replace all wearing parts. I've done all the balls on mine.
The bits I replaced that made biggest difference was the bushes that pin that goes through beam sits in.
Mine broke the bottom pin that turnover ram is mounted on maybe twice a season.
Used to snap the bolts that vari width slid on too.
We just kept it cause other tractors aren't fit to lift 6f and not worth a lot with amount of modifications done to beam.
You can replace all wearing parts. I've done all the balls on mine.
The bits I replaced that made biggest difference was the bushes that pin that goes through beam sits in.
Mine broke the bottom pin that turnover ram is mounted on maybe twice a season.
Used to snap the bolts that vari width slid on too.
We just kept it cause other tractors aren't fit to lift 6f and not worth a lot with amount of modifications done to beam.