What psi should I be putting in my front tyres. 130 hp four wheel drive. Presumably differs if loader on or not.. cheers
Front tyre pressure
- Thread starter Dfarmer135
- Start date
That without loader yeah?
Courier
Member
- Location
- M62 - M1 - M18 triangle
Probably depends on how heavy the counterweight is and how far beyond the back axle the that counterweight acts…
Michelin tyre app is excellent for setting pressures
Enter tyre size, weights and distances and out pops pressures. It's for Michelin tyres, but chose agribib and the pressures will be near enough generic
Far better than guesswork
Front tyres on my k430 Deutz (no loader or ballast) are 14psi, and the valtra with a loader are 28psi
Enter tyre size, weights and distances and out pops pressures. It's for Michelin tyres, but chose agribib and the pressures will be near enough generic
Far better than guesswork
Front tyres on my k430 Deutz (no loader or ballast) are 14psi, and the valtra with a loader are 28psi
ridger
Member
- Location
- Tyrone, Northern Ireland
My loader tractor is at 35psi
smcapstick
Member
- Location
- Kirkby Lonsdale
A very loose rule of thumb is 1BAR in the tears, 2BAR in the fronts (2wd) / 1.5BAR (4wd).
find the static load radius and blow up or down to match it