Mf 7718 calibration
- Thread starter kc6475
- Start date
- Location
- South wales
Have you checked the sensitivity in the dash? That’s not meant to come across patronising
Hi, yep been playing about with the settings, it seems fine until it gets well warmed up and then starts messing around, sometimes it will come to a stop then just lurch backwards, the next time it works fine.
We had the same and calibration helped for a while but it soon went out again it ended up having a new reverse solenoid in the end
- Location
- South wales
My old one Used to be bad on the power Harrow I just got used to it as it didn’t do it every time dread to think how often the shuttles been used in 8k hrs mostly buckraking it’s never had solenoids done,
That's what I have been using it for power harrowing, will see if it makes any difference doing other jobs, obviously to do with the temp of the oil.
Rust
Member
- Location
- Hertfordshire
My 6495 sometimes gives a frightening jolt in reverse. I find it happens far more often with all work lights on, so put it down to electrical issue, solenoid
- Location
- South wales
Worth trying to calibrate it what age is it out of interest ? Hrs?
It's a 19reg 1700 hours.
- Tags
- harrow