- Location
- N.Lincs
Nah, he was just an early version of Spin - always seemed to be running round without his trousersIs that the chap who wrote books for folks that can't budget?
diary of a comedy sheep farm
- Thread starter spin cycle
- Start date
Now then, I had no idea who Liz Fraser was either but apparently there's two, one a writer and one an actress so the question is to which one is yorkie referringpulley is cast which makes things more complicated and why it broke
no idea about brian rix but having googled liz fraser i must agree with yorkie ( hubba hubba..don't tell mrs spin)
I couldn't find any revealing images of the writer however it would appear the actress and Spinny are already aquainted???
Last edited:
- Location
- the brecks norfolk
Cast isn't a problem, that would weld up fine with the right rods and now you'll be able to get the drawers over the boss.pulley is cast which makes things more complicated and why it broke
no idea about brian rix but having googled liz fraser i must agree with yorkie ( hubba hubba..don't tell mrs spin
primmiemoo
Member
- Location
- Devon
The what over the who???
spin cycle
Member
- Location
- north norfolk
i know what you mean primmy.....all this 'pulling the draws over boss and right kinda rods'
.....simple country boy like me ...well,,,it's almost to much
- Location
- the brecks norfolk
I can see how you sheepy lot could get easily confused.......I'm just glad I didn't go into per heating and getting the penetration right!!!!!i know what you mean primmy.....all this 'pulling the draws over boss and right kinda rods'
Poor old spinney would have come over all unnessesary.
spin cycle
Member
- Location
- north norfolk
I can see how you sheepy lot could get easily confused.......I'm just glad I didn't go into per heating and getting the penetration right!!!!!
Poor old spinney would have come over all unnessesary.
i've just been googling 'plasma cutter'.....didn't know what one was
......now wondering if i should by one or whether i'd do more damage than good
- Location
- the brecks norfolk
NO, stay away from the plasma cutters!!!!!!
primmiemoo
Member
- Location
- Devon
Is that TARDIS territory, then?
Cut edges out as wellgoing to have to up my game
loaded it her self
, all that extra work for 'visual effects'
had to knock 1 point as two bales , the cut edge was not facing same way have to point backwards to reduce wind dragCut edges out as well
- Location
- North Norfolk
He has to have some that way to allow for high speed reversing!had to knock 1 point as two bales , the cut edge was not facing same way have to point backwards to reduce wind drag
- Location
- Yorkshire
She
took her an hour to throw them on and stack
this weeks job getting loader brackets on so can 8 them on
- Location
- North Norfolk
- Location
- Yorkshire
I think she may be doing the driving too
had to knock 1 point as two bales , the cut edge was not facing same way have to point backwards to reduce wind drag
How come you haven't done that already?!? I thought you were a big time forage merchant these days or is it a ploy to wear her out?!?!