- Location
- Netherlands
Looks awfully like the old Stoll z665 teddersI’ve joined the pottinger Tedder club but not as big as the one last week.
Looks awfully like the old Stoll z665 teddersI’ve joined the pottinger Tedder club but not as big as the one last week.
I saw that going through town, you must have posted the pic within seconds of it arriving, smart delivery van too.I’ve joined the pottinger Tedder club but not as big as the one last week.
View attachment 1039405View attachment 1039406
I saw that going through town, you must have posted the pic within seconds of it arriving, smart delivery van too.
Ive a one of them for 2 years now lovely tractor only fault is the turning circle like turning the ark royalI don't get the opportunity to post on the new toys very often, but the first new tractor in 10 years arrived on Thursday.
like turning the ark royal
When doing a lot of loader work, do you hitch a front end ,three point linkage weigh frame with weights on to the back end of the tractor to keep the rear end of the tractor firmly on earth the ground.New last week, Case Vestrum, replaces MF 5713. Slowly getting used to vario box, a bit clumsy to start with, give me another week I'll be flying about.
We,ve done that but lock isnt as good as the125 maxxumI`ve always altered the steering stop bolts on mine,makes a big difference. (just not too far)
I haven't put a weight on the back yet, but she does feel slightly lighter on the back end than the Massey, I think the loader might be fitted slightly further forward than the 5713.When doing a lot of loader work, do you hitch a front end ,three point linkage weigh frame with weights on to the back end of the tractor to keep the rear end of the tractor firmly on earth the ground.
I only asked as in the past I had some near goes carrying a 600kg bag of fertiliser on the front end loader on a Case 130.I haven't put a weight on the back yet, but she does feel slightly lighter on the back end than the Massey, I think the loader might be fitted slightly further forward than the 5713.
Out of interest what loader was fitted?I only asked as in the past I had some near goes carrying a 600kg bag of fertiliser on the front end loader on a Case 130.
A “Quicke, I can’t remember the model number.Out of interest what loader was fitted?
I was going to say any chance it was a quicke!A “Quicke, I can’t remember the model number.
View attachment 1039751 turned up Thursday past, replacing a 16 year old 34.7, much comfier!
How is that even possible? One would think that a smaller machine should turn tighter than the larger machine from the same manufacturer.We,ve done that but lock isnt as good as the125 maxxum
Absolute weapon badge awarded there.
If you do buy a 10ft buckrake for it the first thing you need to do it cut a foot off each side, unless you don’t have any side walls on your pit? Otherwise the only way to roll the sides properly is to keep dropping it off.View attachment 1039766
Had it on the pit, new Cvtronic gearbox seems the business, 10ft buckrake pending