thanks for your reply.
when cold its slow for the hi to engage but when warm is completely normal and its quick to come out of hi into low.
the lever does go in fine and it does stay in.
when hot it works fine its snappy and quick either in or out.
it slips back from hi to low once engine is...
I dont think its the clutch now. The old one was totally knackered and the plates and springs were all broken.
had an oil change about a month ago and its all clean but i think its to do with the hi low as well. Seems strange as its slow to go in hi when its cold but when its warm it seems to...
Yes i did it myself with the help of a mate whos an agricultural engineer. Yes they engage fine but are really hard to pull out and then will go in fine after. Tractor will roll a tiny amount once you have managed to get it out. Its not exactly over difficult but it does feel like sometimes you...
I am probs refering to them the wrong way round then. Everything has been changed now on the clutch side including flywheel and slave and master cylinder. Shifts between hi and low when cold can be a bit stready but when warm it is snappy and quick However i do really use it when cold. It stays...
Hello. Range lever is fine to get in and change between. 1,2 and reverse lever is fine to put in gear but very difficult to pull out of 1,2 or reverse without the range lever being in neutral. Just had a new clutch and flywheel as we thought clutch could be the problem so we then put new master...
it does roll once you have moved either of the gear sticks to neutral once you do this it will roll an inch or two either way. But i will try your idea of putting it on an incline and see what happens. Thanks for your comment (-:
Hello…. As usual i am after a little bit of help. We bought a 3350 a while ago and have been doing some work on it, however it is very difficult to change between either one, two and reverse when the brakes are not used. It is fine if you take the 1-4 lever out and also is ok if you stop with...
Think the 5 walkers are 3.4/3.5 wide and the 6 walkers are 3.8/3.9m wide depending on tyres size. The 5 walker would be a lot easier for me to mover about
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.