:-]'s latest activity
-
?Made a another this year, 8x4 so no mesh to cut.
-
?:-] replied to the thread GX160 without oil alert.it is the yellow wire
-
?:-] replied to the thread Deutz brakes.It was a while ago but as I remember I removed the cap from the reservoir then just pushed fluid back through the bleed nipples on the...
-
?:-] replied to the thread Deutz brakes.I wouldn’t know what proper procedure is but pushing fluid back into the calliper with a syringe worked for me.
-
?Greetings to all! I signed up just to get in on this horror show :) Building a 1991 Dx-6.05, the brakes were working when I stripped...
-
?Don't go anywhere near an engine with it, just not worth the risk. Workshop heater?
-
?:-] replied to the thread Simon Cherry Picker.Assuming that your Simon Topper is one of the later ones with electric solenoids You need to check that it is getting power to the coil...
-
?I have an old Simon topper which works perfectly on the up cycle but one of the hydraulic cylinders will not lower on command and only...
-
?:-] replied to the thread Not Quite Farm Engineering or a Quick Bodge..Has the dust been photo shopped in.
-
?I would say todays test has been successful, muck is spread and broken up in a nice thin layer. OH complained it doesn’t aerate the...
-
?I've reached the conclusion you're better off weighing in S/H machinery at the local scrap yard now. Life's too short.
-
?:-] reacted to Pan mixer's post in the thread Not Quite Farm Engineering or a Quick Bodge. with
Like.
Storage for drain rods, off cuts of pipe and old handle but new screws and bolts. -
?Keep 'em coming chaps, I have a thick skin.
-
?Sort of a bodge and a quick fix but I did use a ratchet strap instead of baler twine seeing as it was really high and I didn't fancy...
-
?It’s for trapping those bales that get away from the roundbaler on slopes 🙈😂