7800's latest activity
-
77800 replied to the thread T1 spray scorch.this was one of the very few times Evo would of been better!
-
77800 replied to the thread Luximo slow emergence.the only difference here is the Luximo, both had pdm, it's the luximo thats knocked the crop. BTW how harsh is Luximo post em ?
-
77800 replied to the thread KV tine drill metering wheel sensor retro fit.Did wonder about doing that, if it works it’s the cheapest and easiest, have you done that ?
-
77800 replied to the thread KV tine drill metering wheel sensor retro fit.Where did you get the rotating meter sensor set up ?
-
77800 replied to the thread KV tine drill metering wheel sensor retro fit.Everything is free and turns fine with lots of downward pressure, it just jams with a clod very occasionally. I’ve got a camera on it...
-
77800 replied to the thread KV tine drill metering wheel sensor retro fit.plenty of pressure but an occasional big clod can stop it
-
77800 replied to the thread KV tine drill metering wheel sensor retro fit.yes it bleeps if the metering wheel turns and the fan is off, and it is getting a speed signal from the wheel but doesn't seem to beep...
-
7Have a KV tine drill with metering wheel that occasionally stops turning when a clod blocks the wheel turning, leaving a 'lapwing' plot...
-
7What's the rush for Urea? Genuine question. Yes it looks a bargain against last summers p*sstake prices, when grain was flying, but...
-
77800 replied to the thread Sencrop weather station rain gauge reading low.the sencrop rain gauge (and wind speed) is rubbish, always reading low. I eventually got the raingauge exchanged when it was new but the...
-
7Ha ha that’s some nice stacking! I’ve used classified adds on eBay £10 and it’s just like an add in the paper you can put all you...
