Recent content by 7800

the only difference here is the Luximo, both had pdm, it's the luximo thats knocked the crop. BTW how harsh is Luximo post em ?

Did wonder about doing that, if it works it’s the cheapest and easiest, have you done that ?

Where did you get the rotating meter sensor set up ?

Everything is free and turns fine with lots of downward pressure, it just jams with a clod very occasionally. I’ve got a camera on it but could do with retro fitting a bleeper

plenty of pressure but an occasional big clod can stop it

yes it bleeps if the metering wheel turns and the fan is off, and it is getting a speed signal from the wheel but doesn't seem to beep if the metering wheel stops while drilling. It wouldn't know if the drill was up or down on the linkage so would beep everytime you lift up. Does it need a...

Have a KV tine drill with metering wheel that occasionally stops turning when a clod blocks the wheel turning, leaving a 'lapwing' plot of undrilled crop. Has anyone retro fitted a sensor that will sound an alarm when the metering wheel stops turning ? The ESC control box doesn't seem to do...

the sencrop rain gauge (and wind speed) is rubbish, always reading low. I eventually got the raingauge exchanged when it was new but the replacement was no better. All they say is clean it, makes no difference. This year they increased their annual sub by 30%, i'm paying £100 per year...

what gram for gram cheaper ?

This is about a specific by product I think , not AS generally

Used to be seat right back in the good old days?

https://www.michelmores.com/news-views/news/michelmores-considers-group-action-concerning-losses-caused-use-ammonium-sulphate did this used to be called sulf 8 ? a by product of aspirin manufacture or something anyone know whats happened ?

no, but contact planet helpline

its all on planet, works fine

SOLD