ACEngineering's latest activity

check all the earths, there's a bunch under the dash panels i think and there's a big earth wire on the side of the cab behind panel to...

I know of one of them or one similar, was used for many years on corn drier. Not sure if it's still used or not. Not as tidy as that one...

i just see these one way inline valves a cover up for the actual problem, there not needed unless there's a fault with something else 🤷‍♂️

Not over Christmas but my lads have got into RC rock crawling . There is quite abit of skill involved also quite and you don’t need...

The skid unit manitou used was an industrial version, i once had some one manage to shear the front half shaft off! (would be rear half...

Where were these from could do with one with my fast slow tracking speed on digger, been a par of wires to twist for 3 years... edit...

It's got side shift on headstock too!

Yes there was 4wd option on the IH engined ones. Think that's an IH engined on in op post.

Have the vario now about 18 months and would be v well pleased with it used to have a JCB and it is much superior to the yellow gearbox...

i sell a 4.2kw one

no brainer then for a bedding machine (y)

You can. Set the revs using hand throttle or preset button, the speed is all governed by the foot pedal.

yes if your bedding with it then i would say the hydro will be best IF you can set the forward speed independent of the engine RPM like...

Yes there is a decent starter for it if your in UK i can supply you. BUT what other hi torque starters have you fitted cause high torque...

its the H bit that don't make sense but that is clearly a H! there are several other 4RM25's with different letters but not a H.