agrotron's latest activity

  • A
    agrotron posted the thread Collecting grass off waste land in Machinery.
    I usually flail mow some roughing industrial land approx 40acres. I haven’t done it for a couple of years and now they are asking if I...
  • A
    agrotron replied to the thread Digger Rehosing?.
    Kit you know the sizes and what fitting flowfit.co.uk are cheap enough to make custom hoses.
  • A
    agrotron replied to the thread Herbst mini Low loader tyres.
    It’s on split rim airplane tyres. That’s what the early ones came on.
  • A
    agrotron replied to the thread Herbst mini Low loader tyres.
    Trailer is only rated to carry 8ton
  • A
    agrotron posted the thread Herbst mini Low loader tyres in Machinery.
    Original tyres are getting hard to source and I think these will fit. Seem reasonably priced but not heard of tvs eurogrip tyres before...
    • IMG_0064.png
    • IMG_1147.png
  • A
    agrotron replied to the thread Alternator wiring.
    Have just dropped it off this morning. 🤞it work. After much googling I think I have sorted what each connection is apart from the little...
  • A
    agrotron reacted to Sausage's post in the thread Alternator wiring with Like Like.
    Not sure if it is what you meant above, but the alternator is earthed through the casing. the recessed terminal and short wire are...
  • A
    agrotron posted the thread Alternator wiring in Workshop Projects.
    Just trying to see if this alternator works off a dead machine as I got a job for it. Looking to bench test it but not sure which wire...
    • IMG_1136.jpeg
  • A
    agrotron replied to the thread Why aren't modern tractors fitted with.
    I have got a camera instead of a mirror on a tm that’s used for hedge cutting. It’s handy to see down by the wheel and less likely to...
  • A
    agrotron replied to the thread noco gb150 v battery power pack.
    Buy a topdon, lot cheaper.
  • A
    agrotron replied to the thread Tractor Tyres.
    I got Nokias tri2 on a hedgecutting tractor. Done around 6000hrs mainly road work and are about 50% worn. Grip ok in the dry but not the...
  • A
    agrotron replied to the thread Dewalt or wilwaukee grease gun.
    Got a dewalt one due to having other tools. I would stick with dewalt due to battery situation.
  • A
    agrotron replied to the thread Deutz DX120.
    Did a selector on my old dx86 about 20yrs ago. Didnt have to split the tractor got in through the side. The selector at the time was...
  • A
    agrotron replied to the thread Fencing Stapler.
    I had my stockade gun serviced last year for the first time and it has done 24000 staples, (they have a counter on which they read when...
  • A
    agrotron replied to the thread Induction Heaters.
    I have been looking at them for a whilemand would be interested to know others experiences.
Show older items
Top