Amateur's latest activity
-
AAmateur replied to the thread Fiona drill small seed kit.I bought them in Poland last year from this guy...
-
AAmateur replied to the thread Does porous fords require special coolant.Actually this is correct, dehumidified water is deionized water and that is what is removed from distilled water. However, further...
-
AAmateur replied to the thread Does porous fords require special coolant.Antifreeze plus Distilled water (deionized) is recommended instead of regular water which contains ions, Just wondering if anyone knows...
-
AAmateur replied to the thread Ford 655D digger swing cylinders removal.If you heated up the conical hole I presume you damaged the seals for the bushings, did you replace both the seals and bushings at the...
-
AAmateur replied to the thread Ford 655D digger swing cylinders removal.one of my bolts sheared, but I did not heat anything. did you heat the whole flange with a torch ?
-
ATrying to remove the 2 smalls swing cylinders that move the boom from left to right. I am unable to remove the circular flange with the...
-
-
AHow do I remove the slew rams on a ford 655d. Does the round piece underneath with 6 bolts need to come off . Basically , where do I start??
-
AAmateur replied to the thread Claas Standard-S.Sorry, I did and Thank you.
-
AAmateur replied to the thread Claas Standard-S.I have just bought one one these machines (pic attached) for very small acreages as its difficult to get a contractor to do small...
-
-
AAmateur replied to the thread Claas Standard-S.Here is an article confirming your point on different names: https://heritagemachines.com/nostalgia/1977-claas-mercator-60-combine/ it...
-
AAmateur replied to the thread Claas Standard-S.Thanks for your reply, but its not what I have in mind. Please see attached photo. If you look closely at the end of the combine it...
-
-
ACan anyone shed light on the Claas Standard-S combine harvester. They have a fixed 8'6" header and a Perkins 236 engine. What years were...
-
AAmateur replied to the thread Removing a big pulley from a shaft..No intention to hijack this thread but seen that its very active I wonder can anyone shed light on the Claas Standard-S. Was it before...
-
AAmateur replied to the thread Universal tractors.
-
AAmateur replied to the thread Dowdeswell plough thoughts.Are all DP 8B ploughs adjustable to 12 inches ?
