Andyt880's latest activity
-
That’s a proper gander -
out with the 135, not always plain sailing 😂
-
Andyt880 replied to the thread Classics Earning their keep..
-
-
Best pumped up with a bike pump IME, not a pressure line ;)
-
Andyt880 reacted to AftonShepherd's post in the thread Going to have a Swale of a time! (I hope) with
Like.
Sorry, not sure I'm a natural blogger lol. Very few of my photos look the part when I check back either. Down to a handful of ewes to... -
Andyt880 replied to the thread Sprayer pump with water in the oil.Thanks
-
Andyt880 replied to the thread Sprayer pump with water in the oil.Can any one tell me what that small valve is for on top of the pump?
-
-
Andyt880 replied to the thread Sprayer pump with water in the oil.Ok thanks for that. What can I expect in there when I get the blue bolts loosened? I’ve never seen a diaphragm pump apart?
-
https://www.sprayerpartsspecialist.co.uk/pump-spares-69-c.asp Used this company before for difficult to locate bits.
-
Looks like a bertolini. Diaphrams are easy enough to do and do what @Hard Graft said should be fine
-
Andyt880 replied to the thread Sprayer pump with water in the oil.Yes it’s a diaphragm pump. That’s as much as I know about it. I’ll get it lifted off and get a better look round it and figure it out
-
Fill it up most off the way with oil before you put the last diaphragm on as will save a lot off time and then top up when finished as...
-
It just looks like a simple 3 piston pump. Take the heads off fit new diaphragms drain the oil and refill with new and away you go.
-
Replace diaphragms.
-
I don’t know that type of pump. But it’s probably just a diaphragm gone. Should be an easy fix.
