Recent content by astra

Try scrap yards.lifts from demolished buildings had that kind of thread on the older lifts anyhow..in long lengths too if i remember right..

Got a galvanized roller door here and it's starting to rust where it rubs together as it's rolling up.what would be the best way to prolong the life of the door.anyone used a rust convertor and a cold galvanizing product like zinga or a good quality paint?

I haven't been to the tractor yet but from what im being told there is no pipe connected to the pump on the pressure side no flow when tractor is running..

Not the pipe.absolutely no flow from pump whatsoever,New pipe disconnected from pump completely..

Second vote for landy here.top outfit..👍

Mate has a 7840 and pipe burst from hyd pump to orbital unit.took off the pipe and got new one made the next day and now he has zero flow from the hyd pump..anyone came across this before? Thanks all...

Give us a review please..looking at getting new one myself..

Sound lads to deal with...no connection but got few bits off them over the years...

Yes...xtrac is the model ur looking for.5 year old here but his older cousins do be on it too no bother..

Cheers guys.. Will try that...

Yes,dry as could be...wonder could I use some Indian head or similar on it...

Anyone any tips on the cover gasket on these pumps.changed the o rings on the stopper shaft the weekend and used new gasket putting the top cover back on but this evening I can see a slight weep around it

At least she was old enough to reach the pedals...

Second vote here for landy in Skipton 110% firm...

Cheers,If(when) I get stuck I'll give ya a shout...