Recent content by biggles

  1. B

    Repacement radio

    Very easy to fit , it came with two different adapters, so it connected straight to the existing plugs, it’s controls are easy to use and it goes loud enough to be heard in an older vehicle. I will be fitting 3 more when I’ve got time as I like to charge phone off it and my old machinery doesn’t...
  2. B

    Diesel engine road compressor

    Got a 7/41 from euroauctions at leeds. looks like shite but runs well and makes good clean air, yanmar engine so should be good, cost £1250 about 18month ago. think they have another sale at the start of December. theres normally 30 odd compressors in. 7/41 will be 140cfm so popular with the...
  3. B

    Tub feeder blades

    Have used them before, and found them helpful for hedge cutter flails, cheers
  4. B

    Tub feeder blades

    Looked on flails direct and there’s a lot of options that fit the hole centres but vary massively on physical size, so I’m not sure which I need, should all the blade be the same or do you fit different ones in different places ? Cheers
  5. B

    Tub feeder blades

    Got an old Kuhn tub feeder here and the blades all all shot, they seam to be a bit of a mix match of different blades that have been grafted in over the years, could anyone tell me what type of blades I need and where is the best place to get them from, cheers
  6. B

    Repacement radio

    I’ve got two of the same here, can’t go wrong for a tenner, never used the remote but the kids like the blue tooth for playing the music off there phones, one in a 2650 and other in 3cx. Very clear and go off with the key unlike the originals, so no more flat batteries. Also have a clock on them...
  7. B

    Jcb electrical plug

    I’ll have a measure up, that sounds like the one, cheers lads 👍
  8. B

    Jcb electrical plug

    Does anyone know what the plug that fits onto a solenoid like this is called or where I could get one? On a Jcb transmission and the old one has dropped to pieces after getting hot, cheers
  9. B

    Wintertons of Lichfield memories?!

    Bought my first tractor out of Lichfield sale in 94/95 , it had traveled from somewhere in Wales if the log book was up to date. Then sold an old major in there a few years later. Liked the place but often the entries when mostly last months stuff that was re entered.
  10. B

    Nixon power washer

    @Tractor bob which model did you go for? I’m looking at them but unsure of which size to go for, cheers
  11. B

    Scissor lift 4 metres min lift

    search euroauctions at leeds, they have a sale next week i think. There will be loads of all different shapes and sizes there
  12. B

    Fuel price tracker

    What additive are people recommending? I’ve got about 2000l left which will last me till spring, just for the scraper and loadall
  13. B

    Turbo nozzles

    It was a farm sale purchase about 15 years ago, can’t see any numbers on the pump, it’s just rusty and covered in concrete. There was no hose or Lance so what it has now was just a fit up from the old washer so will probable be wrong. Cheers
  14. B

    Turbo nozzles

    I’ll have a measure today then, can do volume but have nothing to check pressure as there’s no gauge on the washer, might have to have a hunt round for a gauge. Cheers
  15. B

    Turbo nozzles

    Have seen on several pressure washer threads people praising there turbo nozzles, so I thought I’d best get one, where is the best place to get one from and which size do I need. It’s for a 9hp diesel wash with 3/8 hose, sorry there is no other info on the washer or pump. Cheers
Top