Case140's latest activity
-
Case140 replied to the thread Merlo P33 7.Me too! Wondering where you found the fault? -
I use petrol, works fine.
-
Case140 replied to the thread Horsch Sprinter control box.Out of interest (Im not much help Im afraid!) What is the seed sensor box above the horsch boxes?
-
Case140 replied to the thread Horsch Sprinter control box.As I said...I was very lucky! Lots of uncut crops here too...
-
Case140 replied to the thread Horsch Sprinter control box.Our weather has been a pain for crops this year; growing, harvesting and sowing 🤮. But I was lucky last mon ...an all nighter finished...
-
Case140 replied to the thread Horsch Sprinter control box.And still running 👍! I can copy the pages if any use. I have never seen a CO with mechanical drive but often thought it would be fine. I...
-
Case140 replied to the thread New holland CH combine.Looks very like my 23 year old JD cts?? 🤷🤷
-
Case140 replied to the thread John Deere 9780/cts drive shaft yoke.Oh and taper on hub and gearbox centre looked perfect 👌
-
Case140 replied to the thread John Deere 9780/cts drive shaft yoke.Thanks...have had shaft out and checked that. Nut was tight, and is now VERY tight!! Hub looked perfect ...still has machining marks on...
-
Case140 replied to the thread John Deere 9780/cts drive shaft yoke.Fitted and working. €500 (but I didnt push him on time or prob would have been more!) Prop shaft seems to be running smoothly now but...
-
-
Case140 replied to the thread John Deere 9780/cts drive shaft yoke.Ah jeepers that is not good 🤮. Hope evervbody ok. I have a new splined boss made and fitted to my yoke and will be fitting it friday am...
-
-
Case140 replied to the thread John Deere 9780/cts drive shaft yoke.Thanks guys for all the imput. Ill let you know how I get on
-
Case140 replied to the thread John Deere 9780/cts drive shaft yoke.Thats what trying to do atm. Have engineering shop working on it. Fingers crossed🤞
-
Case140 replied to the thread John Deere 9780/cts drive shaft yoke.2000. Not a superceeded number ...just obsolete!
-
Try Bailey Morris at St Neots, they will most likely be able to help. Have a contact that can get bits made pretty promptly if all else...
