Case290's latest activity
-
Case290 replied to the thread Muck Store Size.That’s about sums it up some one from the city will judge what you need on your farm in minutes when you have lived worked on it for a... -
Case290 replied to the thread Kuhn piggyback drill linkage.Yes it’s long gone
-
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.All working just fine with the flow valve had to adjust it again when warm as said. geeess it’s wet
-
-
Case290 replied to the thread Best yard security barrier.That doesn’t sound good.. yes electric gate get it done closed all the time has help a lot … tree trunks are good in all the un used...
-
Don't matter how much money you throw at EA for rivers they will never sort the job cos it's not in their DNA to sort it , they want it...
-
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.Ill put one on the seed drill fan as this has also been surging 👍
-
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.Thanks that’s very help full. Something like this i guess
-
-
Case290 reacted to Genesis's post in the thread what speed hydraulic motor for fert spinner ? with
Like.
On our 8870, same hydraulics as your challenger, we had to fit an adjustable flow restrictor on the free flow return line. I know that... -
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.Hydraulics making the motor surge 40/50 rpm any ideas what’s causing that I’ve got a free flow return (tried normal as well Made no...
-
-
Case290 reacted to Genesis's post in the thread what speed hydraulic motor for fert spinner ? with Like.
See this thread on forum4farming: https://www.forum4farming.com/forum/index.php?threads/hyd-motor-drive-for-bogballe-m2w.12942/ I...
-
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.So far used the over run clutch from the old Pto shaft motor is mounted on a bit of scrap Chanel just some pipes and it’s a trial run...
-
-
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.Going for a complete stab in the dark @100cc looks like it’ll do it based on the assumption tractors are around 175/200 bar 100- 110...
-
-
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.You don’t know then
-
Case290 replied to the thread what speed hydraulic motor for fert spinner ?.What hyd motor would be needed for Krm m35 to replace Pto drive Currently on Pto but at 1200 engin revs dosnt like turning to much
-
-
Case290 replied to the thread Today at work.Thought I’d try hooking up this and attempt some fert and fair play it traveled very well regards not making any mess. Still standing...
-
