Case290's latest activity

Up date on the turbo actuator John Deere fitted all done. Linkage on the turbo was free so went with actuator only.

My linseeds done

Found something funny

Our first drilled maize is up. Strip tilled into sprayed off lucerne (never very complete as the leaf area is tiny compared to the...

Yes I did get 1 error code followed by the 50% reduction in power. Yes rattle noises from the actuator it’s definitely done.

Claas arion 650Turbo actuator 3100hrs gets a thumbs 👎any heads up on where to get a replacement.

I can change the pluses from the lazer control I’ll try that first.. and there are some looks like restriction valves in the Hyd hose...

The best looking plots were from a vertical disc and vertical tine . Go figure . Which post was slagging wardy ( barstools) Name and shame

V Dry here that graph is Optimistic.

Lazer grade controls Trimble CB60 all working but it’s jumpy when operating the system is plumed into the 2 front Hyd rams with the rear...

spring drilling went very here but no rain still going to fudge it up

I’ve tried the 2.5 inch points with the front cutting disc into cover .I’ve used the Spaldings 7 inch I liked them got a good spread of...

Looked like the Moore drill was the best by some way from the video. Followed by the Amazone. What’s wardy done ! quad tracks gone.

Had the starter motor go on the 400. By passed the starter relay nothing .. diagnosed starter. fixed could it be that.

yes sure if they went about swapping the coulters I agree would have been much better. But they couldn’t be arsed