Hi all, I’m after a pair of front 8 stud 2wd John Deere front wheels ideally with tyres to suit 6000/6010/6020 series. Anything considered; at sensible money, can get them fetched from most places. 13.6/38 or 16.9/34 rears would be good too; mine has come on turfs. Thanks.
Not really, they pivot over nicely, make sure throttle and clutch cable and pto and hitch cable are disconnected, remove big bolts under the cab Matt few other odds and sods, couple of strong bars in the pivot holes and then we tilted it over with a block and tackle and loader tractor easy enough.
Hi access and visibility was very poor without the cab tilted, we didn’t even try and look, just tilted the cab and then removed the side casing of the housing that has the levers/roll pins in, this was easier with one person on top of the gearbox casting and one underneath, we then doubled all...
I think the massy would be a stronger built tractor, just my opinion, I’ve owned a jd5400& a same explorer albeit a 90 model, both seemed a far lighter duty machine than the 3065 a friend had. If you were lucky enough to drop on a John Deere 6200 at sensible money then I think in that size of...
Hi all, I’m looking at buying a used John Deere 5090m it’s on 5000hours mainly on a feeder and yard work. No loader. It all seems sound but obviously I’m aware they are a much cheaper built tractor than the 6000 series we are used to. Anyone think good or bad of this range? Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.