Recent content by Cowman338

Thinking of making a frame to fit a pair of forks I have. Could anyone tell me where I could buy a pair of profiled slotted fork rails to fit standard pallet forks and any prices. Im located in north Staffordshire. Thanks

I bad the same problem a few years back after an enzo abortion storm went through my ewes, jabbed everything with alamycin and they stopped. The following year I enzovaxed them 4 weeks before tupping and what a disaster. Learnt after that the vaccine can mess up conception

3 years old Been running with small herd Will be tb tested next week Located north Staffordshire 07967394509 £1500

£7.40 round here for 6 layers baled with fusion

1000l red today 44.5 off rix. Monday delivery

Just use the red top no.5 at half dose. Had alot of ewes with twin lamb this year, been using 40ml under skin as recommended by vet.

Watsons 52p for 1500 litres red today. Delivery tuesday

I've put a new air filter in it last week, Its not breathing much at all really and the engine oil looks good

I will try and get a video posted when I next use it, there is plenty of fuel getting to the pump though

Thanks for the replies. I havent done anything yet as I wanted to get some advice first. I was told it had been serviced when I bought it but cant guarantee. Could you tell me how I check the oil in the fuel pump and governor please?

I've got a zetor 7341 with just over 4000 hours on the clock. It starts straight up but runs very rough as though it's out of timing, popping and missing every so often and smokes a fair bit. Has been like this since I bought it last year. Could it be as simple as injectors or something got out...

H j Lea oakes Lamb finisher £212 blown, 4 tonne minimum order

Long time since we had one but ours did the same thing quite often, one of the linkages just under the sticks in the cab got wedged. Take plastic cover off and look at the linkages, a rod may of gone too far and got stuck. And as for the TA switch, it stops in low if the power feed is lost...

58.65 for 1000 litres today off RIX

I have a 2012 5455 Dyna 4 and love it, 5000 hours on the clock, plenty of power for compact size. Perfect loader tractor with snoopy bonnet and hi viz cab. Front axle bangs alot when in and out of 4wd, anyone any advice on this? Thanks