Recent content by cozzie

  1. C

    Pneumonia in Calves

    pneumonia up in at the top of the windpipe/larynx. they will be making allot of grunting noise
  2. C

    Pneumonia in Calves

    have a few down with Larynx pneumonia at the moment, as always a b*****d to cure. anyone got something out of the ordinary or found some mix of drugs that are hitting it?. its been a hard winter on cattle, way too many losses, a hangover from the bad summer I reckon
  3. C

    Pneumonia in Calves

    How hard?
  4. C

    12v water pumps on solar system for cattle

    If you could give me a lead on the pump, it would be great, currently looking at this one https://www.xylem.com/siteassets/brand/jabsco/resources/technical-brochure/4325-technical-data-sheet.pdf Can people recommend a particular brand of panel or are they all the same?
  5. C

    12v water pumps on solar system for cattle

    Hello Looking for information on decent 12v water pumps to run on a solar system with a battery. looking for something that will last and with a decent output at between 2 and 3 bar. I can run a couple of these pumps together to get more output. The pump will be sited about 1m above the water...
  6. C

    Covering Slurry lagoons??? Good thing or not???

    what process has it as a by product?
  7. C

    Non payment of rent due to Covid19

    is their line of business badly affected by C-19 and do you consider their arrears genuine
  8. C

    Postknockers which one to buy?

    why are they so high?
  9. C

    compost windrower / turner.....contractor ???

    Would anyone have a ball park figure on price of a menart Turner similar to those pictured above
  10. C

    Pins and bushes

    If I use both harder pins and harder bushes, will the wear be less than softer pin and softer Bushs if greasing was the same
  11. C

    Pins and bushes

    Im just ordering up new pins and bushes. Its a Quicke 955 loader im doing. changing the bushes to a much higher load rating that the standard PTFE lined brass ones. Considering the bushes are now harder, if I make the pins out of EN24 am I doing the right. Both bushes and pins are hi wear, is...
  12. C

    difference between oilite brass bushings

    the bushes are off a Quicke loader, the loader gets very heavy use and I find the Oilite bush with the yellow penetrated line as pictured above fail. They wear under load even when they are lubricated. these are 2 mm wall, ideally what I'm looking for something with 3mm wall and it sorts my...
  13. C

    difference between oilite brass bushings

    I'm looking to know can I replace the first type bush with the second bush on a tractor loader. Reason been that the second bush has a 1mm thicker wall and I'm want to rebore the hole 2mm bigger and by using the second bush it will allow me to remove all the slack.
  14. C

    AminoA

    to me the tramline looks wider on the inside field margin (left) than it does on the right, meaning the sprayer nozzles would be running over the area that is supposed to be showing the difference ?
  15. C

    Heston Bales how high is your stack?

    36ft high ?:eek:
Top