crofter 65's latest activity
-
crofter 65 replied to the thread Ford 4000 running hot.If it's not actually running hot it may have a voltage stabiliser on the temp gauge and if they fail it can make it read hot. -
crofter 65 reacted to MrNoo's post in the thread Ferguson TEF20: Heavy Oil Consumption after overhaul with
Like.
Used Agriline liners/pistons in one before and never again, it took an age for the rings to bed in and I never telly believed they did... -
-
crofter 65 replied to the thread MF 20 Speedo on dash not working.The angle drive fits in the round cover where the PTO lever is, I repaired my angle drive but it's stopped working again so I may have...
-
I just pressed mine in with a vice and the old bearing race
-
Don't you be coming here all "Mr. I can tell a 35 from a 35X" and then start talking about alternators.
-
Expander foam.
-
Chicken wire, tin snips and a hammer shaft.
-
I have a problem with birds getting into my workshop / shed, (the feathered kind unfortunately) They have pushed out the foam packers at...
-
Assuming it's not two pack he is correct, but don't use the cheap thinners that are for undercoats and washing the gun out, your paint...
-
crofter 65 replied to the thread quad bike insurance.I am just getting quotes today, it seems around £200-250. I have tried NFU in the past for quad and Land Rover, at different times and...
-
To get the king pin out ....
-
crofter 65 replied to the thread International B275 - 5th gear?.Did the B250's have a five speed gearbox.
