Recent content by Dalos

I don't quite remember as I did it a couple of weeks ago but it could have been in the land part or the sfi checking part,

make sure the land sizes are correct on your rpa land tabs as we had a few that were just .001ha wrongly oversize , i corrected them down and I was able to open all options , i think there is a list that shows parcels that have a discrepancy.

I'm not prepared to risk a £90k machine disappearing and maybe not being paid out by the insurance as I had the chance to reclaim it . The police were putting up cameras around the wood, they know the gang that is doing it and I agree to catch them in the process would be amazing but not with...

It was the manitou one from the factory, very happy to be able to find it straight away, drive it home and carry on with my day

tractors and telehandlers are disapearing at a couple a night in shropshire just now , my new manitou was stolen on early saturday morning although i had a tracker so i was able to go and get it within a couple of hours of it being parked up 15 miles away in a dense wood . organised crime gang...

We had a jetter pipe come loose on one robot under the cover that we didn't find for a week that put our bacto up massively, we have 6 that could be the problem. it was only after having bleed hole alarm that we found the culprit, we had a few false problem solves that didn't work

looks good , is the ground a bit damp

is it a lot easier to set up on an autosteer ready jd tractor , as in you can just wire in rather than have to plug into the hydraulic steering and wheel sensors and can it work in conjunction with the itec buttons etc , we have autosteer but no section control and only sf1 so i am thinking...

New Manitou 737 came last week , decided to keep the old one as its been a fantastic machine , liking the auto handbrake on the new one

I had mine back in 5 weeks yesterday , i thought i was going to be in trouble as i missed to send the renewal in good time and was due to run out tomorrow 😅. west mercia area , I was looking to line someone up to keep my guns Just in time management!!

What do people make of this off the hmrc website, indicates that maybe a shed and other infrastructure is eligible against tax ?

I have 28 off a rotary I have finished with , all other bits available also

Would either of these work for silage?

I have one of these spare,

@Chips , how much extra is a filler arm and cone as that will get you to the same driver experience as your fold down filler on your last tanker rather than having to get out and get shitty each fill