dave7840's latest activity

  • D
    dave7840 replied to the thread The Pallet Business.
    Use to shred a lot of unrepairable pallets that chep would bring to us, 3 to 4 lorries a week and because you could see them from the...
  • D
    dave7840 replied to the thread Car lift for clutch replacement.
    Bought this because we don't have enough room in the workshop for a fixed. Big mistake. Can't get to not lift and lean over by about...
    • 1000010789.jpg
    • 1000010792.jpg
    • 1000010793.jpg
    • 1000010797.jpg
  • D
    dave7840 replied to the thread What % of people call back? Global Poll.
    Having a big problems with anyone ringing or emailing back. Had parts we need sat waiting to be picked up for weeks because when you...
  • D
    dave7840 replied to the thread New toy day.
    No just the one, if I told you how many bales i think it will do, you would think we're crazy. Started a new business last November and...
  • D
    dave7840 replied to the thread New toy day.
    Just had a look because never heard of them, your right 10 ton machine which is smallest they do, is 225hp. That's double what say a...
  • D
    dave7840 replied to the thread New toy day.
    Yeah I get it for that job, but I still think a 419 with a good operator would handle most single chopper outfits
  • D
    dave7840 replied to the thread New toy day.
    Didn't take it as one, you right that size of shovel has fallen out of fashion. The old 412s and 414s were so popular back in the day...
  • D
    dave7840 replied to the thread New toy day.
    Greenwaste shredding, its the only shovel of that size, with that much power to weight of any make, 420 and 419 are to big and heavy to...
  • D
    dave7840 replied to the thread New toy day.
    its the high lift version which is rated at 4.5 ton, but probably closer to 5
  • D
    dave7840 replied to the thread New toy day.
    Sat waiting to be pdi'ed, probably won't get it till its on a 24 plate. Not desperate for it. Been an expensive month, new balers sat at...
    • 1000009649.jpg
    • 1000009650.jpg
    • 1000009497.jpg
  • D
    dave7840 replied to the thread Combi baler for 120 hp.
    Depreciation and parts, most of which were pickup tines Worked out cost to change is £1.82. 55p sounds better
  • D
    dave7840 replied to the thread Combi baler for 120 hp.
    Planning on pulling today's purchase with 125hp, I hope. Handled wrapper towed behind baler fine, although combi is a fare bit heavier...
    • 1000009497.jpg
  • D
    dave7840 replied to the thread New Holland tm165 leaking oil.
    It's a compensator valve, strip it apart and see what you find. They're not cheap so worth having a look
    • 1000009475.jpg
  • D
    dave7840 replied to the thread New Holland seat sensor.
    14093 is a short in sensor wiring, probably damaged behind seat. Joining the wires wont work because its not an open or closed circuit...
  • D
    dave7840 replied to the thread Puma 185 Oil flow.
    had the same issue last week, the fan barely runs on ours with it turned right down now but doesnt take much of a turn to get it up to speed
Show older items
Top