Deere342's latest activity
-
Deere342 replied to the thread Bomford 457 Hedge Trimmer.I ordered the part and this turned up this morning, the images on the website show a plug in the middle, which I had assumed would come... -
-
Deere342 replied to the thread Bomford 457 Hedge Trimmer.So do I get a V8008 KONTAK CC END COV C/W OUTLET PORT to replace my plate with the Kontak name on it? @Mr Happy @Tractortech @C.J...
-
Deere342 replied to the thread Bomford 457 Hedge Trimmer.Other end! Most definitely a Kontak spool block.
-
-
Deere342 replied to the thread Bomford 457 Hedge Trimmer.I'll get a photo of the opposite end tomorrow. So general consensus is that I need a V8008 KONTAK CC END COV C?W OUTLET PORT not the...
-
Deere342 replied to the thread Bomford 457 Hedge Trimmer.The end plate on the spool block definitely resembles the V8008 Kontak CC END COV C/W Outlet port shown in the second image posted by...
-
-
Deere342 replied to the thread Bomford 457 Hedge Trimmer.Thank you very much, will the valve block be stamped with a name? I'll take another look, remove the nettles!!
-
Good evening, I have a Bomford 457 Hedge Trimmer which has a spool block set up for open centre hydraulics. I run it on a John Deere...
-
-
Deere342 replied to the thread Free flow return - John Deere 2140.There does not seem to be much wear/play in either linkage to either spool. What is the rack housing?
-
Deere342 replied to the thread Free flow return - John Deere 2140.Returning to this issue, I find that both spools valves will extend a ram really quickly, the second spool returns really slowly and...
-
They can become worn in the rack and pinion end. You can dismantle and check if yr up to it. Also, check the linkages for wear. The...
-
Deere342 replied to the thread Free flow return - John Deere 2140.I have two spool values in the cab, four couplers on the back of the tractor, a pair either side of the top link. The spool nearest the...
-
Deere342 replied to the thread Free flow return - John Deere 2140.Thank you for the replies. The reason I asked is because the second spool on the tractor doesn't seem to work well. By this I mean it...
-
Does anyone know where I could add a free flow return on the back end of a John Deere 2140? For running a bale wrapper or log splitter...
